Description:
This is a security feature that allows ONLY the argued Stealth IP Address(s) to
communicate with the unit for FTP and other services. Up to four IP addresses
may argued. When you use this command, if you do not argue the IP address of the
machine you are connecting from, then you will not be able to connect to that
unit after executing this command. The unit does not need to be reset for this
setting to activate.
Form:
STEALTHIPADDRESS|SIP|SP [ARGUMENT] [ADDRESS]
Argument List:
Terse Verbose Description
0 none Numerical designation of 1st Host
1 none Numerical designation of 2nd Host
2 none Numerical designation of 3rd Host
3 none Numerical designation of 4th Host
CLEAR Clears all 4 Stealth IP Addresses
Address:
Form Description
nnn.nnn.nnn.nnn Host IP Address for this unit in decimal notation
or 0.0.0.0 to clear the setting.
Response:
MODIFY STEALTHIPADDRES RESPONSE
Verbose- "OK\r\n" to acknowledge receipt of command, or
"ERROR- [Description]\r\n" if error, ending command
Terse- "0\r\n" to acknowledge receipt of command, or
"[1-255]\r\n" if error, ending command
"\r\n" concludes modify responses (empty line)
DISPLAY STEALTHIPADDRESS RESPONSE
Verbose- "OK\r\n" to acknowledge receipt of command, followed by
"STEALTHIPADDRESS= [STANDARD]\r\n", or
"ERROR- [Description]\r\n" if error, ending command
Terse- "0\r\n" to acknowledge receipt of command, followed by
"[NUMERIC STANDARD]\r\n", or
"[1-255]\r\n" if error, ending command
"\r\n" concludes display responses (empty line)
Examples:
Verbose command to retrieve current setting:
STEALTHIPADDRESS <enter>
Response is: OK\r\n
STEALTHIPADDRESS= 192.168.10.82, 192.168.10.81, 0.0.0.0, 0.0.0.0\r\n
Terse command to retrieve current setting:
SP <enter>
Response is: 0\r\n
192.168.10.82, 192.168.10.81, 0.0.0.0, 0.0.0.0\r\n
Verbose command to change setting:
STEALTHIPADDRESS 0 192.168.10.81 1 192.168.10.82 2 192.168.10.199 3 192.168.10.225 <enter>
Response is: OK\r\n
Verbose command to clear setting:
STEALTHIPADDRESS CLEAR <enter>
Response is: OK\r\n
Terse command to change setting:
SP 0 192.168.10.81 1 192.168.10.82 2 192.168.10.199 3 192.168.10.225 <enter>
Response is: 0\r\n
Notes:
Products Supporting Command