Description:
Display or Modify the current SDI video fault setting. This setting sets
the video resolution when in video fault.
Form:
Command Handler: DCMD
SDIVIDEOFAULT|SVF|S6 [MODE]
Select the type for video fault
MODE= 480I59.94
576I50
720P59.94
720P50
1080I59.94
1080I50
1080P59.94 only available with sled boards BI02, BI10 and BI20
1080P50 only available with sled boards BI02, BI10 and BI20
1080P29.97 only available with sled boards BI02, BI10 and BI20
1080P25 only available with sled boards BI02, BI10 and BI20
Response:
RUNVIDEODROP RESPONSE
Verbose- "OK\r\n" to acknowledge receipt of command, or
"ERROR- [Description]\r\n" if error, ending command
Terse- "0\r\n" to acknowledge receipt of command, or
"[NON-ZERO NUMERIC VALUE]\r\n" if error, ending command
"\r\n" concludes modify responses (empty line)
Examples:
Get current fault mode
*.DCMD SVF
SdiVideoFault= 720P59.94
Set mode to 480I59.94
*.DCMD SVF 480I59.94
Notes:
This setting will be applied on startup when no video is present. If video
becomes present, the setting will be overridden by the current video setting.
1080P options are only available when the board info command(BIF) replies with
BI02, BI10 or BI20.