Description:
Enable or disable the DVB_ASI input port. If receive mode is enabled, and a valid DVB-ASI signal is detected, the unit will play the stream. If the input contains a multiple program transport stream (MPTS), the system will play the program specified by DECODEPGMNUM setting (which defaults to the first program listed in the PAT table).
The setting is stored as a decoder configuration option and will be automatically applied when the system starts or if the configuration changes have been saved.
If a decoder error is detected, the system will stop DVB-ASI playback to recover from the error. DVB-ASI will be automatically restarted after wating for the number of milliseconds configured in the MCASTERRRECOVER setting. The default recovery time is 10000 milliseconds.
Form:
DVBASIMODE|DVB|DB [ARGUMENT]
Argument List:
Terse Verbose Description
0 OFF Disable DVB-ASI input
1 RECEIVE Enable DVB-ASI receive
Response:
MODIFY DVBASIMODE RESPONSE
Verbose- "OK\r\n" to acknowledge receipt of command, or
"ERROR- [Description]\r\n" if error, ending command
Terse- "0\r\n" to acknowledge receipt of command, or
"[NON-ZERO NUMERIC VALUE]\r\n" if error, ending command
"\r\n" concludes modify responses (empty line)
DISPLAY DVBASIMODE RESPONSE
Verbose- "OK\r\n" to acknowledge receipt of command, followed by
"DVBASIMODE= [STANDARD]\r\n", or
"ERROR- [Description]\r\n" if error, ending command
Terse- "0\r\n" to acknowledge receipt of command, followed by
"[TERSE NUMERIC VALUE]\r\n", or
"[NON-ZERO NUMERIC VALUE]\r\n" if error, ending command
"\r\n" concludes display responses (empty line)
Examples:
Verbose command to retrieve current setting:
DVBASIMODE <enter>
Response is: OK\r\n
DVBASIMODE= OFF\r\n
Terse command to retrieve current setting:
DB <enter>
Response is: 0\r\n
0\r\n
Verbose command to change setting to recieve:
DVBASIMODE RECIEVE <enter>
Response is: OK\r\n
Terse command to change setting to receive:
DB 1 <enter>
Response is: 0\r\n
Notes:
Products Supporting Command